- Do Not use low melting fabrics
- Do Not steam iron
- Do Not apply hot iron directly to embroidered area
Step 1 – All garments should be freshly laundered.
Step 2 – Set iron to Cotton setting or 400 degrees.
Step 3 – Thoroughly iron area of garment where patch will be placed.
Step 4 – Place patch on desired location of garment.
Step 5 – Place cloth or light towel over patch. While using a slow circular motion, press firmly for 30 seconds.
Step 6 – Turn garment inside out, then iron back of patch for 30 seconds.
Step 7 – Let patch area cool for one minute. If edge of patch can be lifted, repeat step six.